NestyFinds

Blueair DreamWell replacement wick

By the NestyFinds editorial team · Researched from manufacturer pages, manuals and the maker's own Amazon listings · Reviewed:

The part you need

113807

A single ring-shaped wick that sits in the DreamWell's filter cage.

Blueair says: Every 6 months, based on about 10 hours of use a day, per its Amazon listing and the FAQ on its store page.

Check current price for the Blueair DreamWell replacement wick on Amazon (opens in a new tab)

Price, seller and package contents change. Check the variant on Amazon before you buy.

Does it fit your unit?

Fits these models

  • Blueair DreamWell Humidifier, 1 gallon — Blueair's Amazon listing names the H38i and says the wick is designed for this unit.
  • Blueair DreamWell Humidifier, 2 gallon — the H76i in the same listing; Blueair's store sells this wick for both sizes.

Does NOT fit — commonly confused

  • Blueair InvisibleMist Humidifier (H35i) — Blueair sells a separate wick that it says fits only that model.
  • Blueair 2-in-1 Purify + Humidify — Blueair sells a separate wick that it says fits only that machine.

Blueair does not agree with itself here

Blueair gives this wick two lifetimes. Its store page lists a 1-year lifetime and its subscription ships one wick every 12 months, while the FAQ on the same page says to replace it every 6 months, as does Blueair's Amazon listing, which bases that figure on about 10 hours of use a day.

Cleaning is split the same way: one FAQ answer says once a month, another says weekly while in use. At 10 hours a day, 6 months is about 1,800 hours, or roughly 75 days of round-the-clock running. Blueair says the filter light counts fan speed, usage time and pollution levels.

Variants Blueair sells

  • Single wick — Blueair's one-time purchase.
  • Filter subscription — Blueair ships one wick every 12 months.

Units we have researched that take this wick: Blueair DreamWell Humidifier (1 gallon) .

What each part number is

113807
Blueair's part number, on its own store and on its Amazon listing, which Amazon.com sells.

What the manufacturer documents

What is in the set

A single ring-shaped wick that sits in the DreamWell's filter cage. Water from the tank wets it and the fan moves air through it, which is how DreamWell humidifies without visible mist.

Blueair describes the wick as machine washable. Its FAQ says minerals and debris from the fill water collect on it as white or yellow buildup, sometimes with a slight odor.

How often to change it

Every 6 months, based on about 10 hours of use a day, per its Amazon listing and the FAQ on its store page.

The same store page's product details, and Blueair's DreamWell product page, say 1 year. The humidifier's display and the Blueair app alert you when a new wick is due.

Blueair’s page for this filter

Resetting the filter indicator

  1. Fit the new wick into the filter cage and put the humidifier back together.
  2. Press and hold the fan speed button for about 15 seconds, until the LEDs on the interface light up, then release.
  3. The wick replacement indicator should blink three times and then disappear.

Steps as documented by Blueair. If the light stays on after this, the troubleshooting below covers why.

Genuine vs third-party filters

Blueair labels this part a genuine Blueair replacement filter, and its Amazon listing says it is designed for the DreamWell 1-gallon unit.

The Blueair pages we read say nothing about third-party wicks or about what one would do to the warranty. Most wicks Amazon shows for a DreamWell search are third-party parts; Blueair's own carries part number 113807.

That is Blueair’s stated position, reported as theirs. We have not tested third-party filters and make no claim about how well they work.

When something goes wrong

Symptom Why it happens What to do
White or yellow buildup on the wick. Minerals and debris from the fill water, per Blueair. Soak 1 hour: 20 g citric acid per liter, then rinse.
A slight odor from the humidifier. Buildup trapped in the wick, per Blueair's FAQ. Rinse the wick under running water; soak if it persists.
The indicator stays on after a new wick. Blueair says the indicator must be reset by hand. Hold the fan speed button for about 15 seconds.
Its humidity reading differs from your hygrometer. Blueair says sensors can differ by 5% or more. Keep sensors out of airflow; allow several hours to settle.
Search results mix many DreamWell-compatible wicks. Most of those listings are third-party parts. Look for Blueair's part number, 113807.
Check current price for the Blueair DreamWell replacement wick on Amazon (opens in a new tab)

Price, seller and package contents change. Check the variant on Amazon before you buy.

How we researched this

Checked against the manufacturer's own pages. We did not test this filter. Nothing here is a measurement of ours: every figure is either documented by the manufacturer or published by an independent standards or testing body, and where the two disagree this page says so.

Not verified for this model — 3 notes
  • Blueair's DreamWell product and wick pages link no user manual; the cleaning and reset steps come from the FAQ on the wick page.
  • The reset steps sit in the same FAQ answer as the 6-month figure that contradicts Blueair's 1-year figure.
  • The H38i and H76i model names come from Blueair's Amazon listing for this wick.

Sources consulted